Serial Number

Device Name

Brand

Model

Specifications

Quantity

Unit

1

Single 8-inch Full-Range Speaker

Model

CF-308

UK (China)

CF-308

Driver Configuration: LF: 1×8“ HF: 1×1.33”

Frequency Response (±3dB): 63Hz–20kHz

Sensitivity (SPL 1W/1M): 96dB

Maximum Sound Pressure Level (MAX SPL@1m): 121dB

Rated Power (AES): 200W / Peak Power: 400W

Nominal Impedance: 8Ω

Crossover Frequency: 2.4 kHz

Coverage (H × V): 90° × 50°

Connectors: 2 × Speakon NL4 (+1/-1)

Mounting hardware: 7×M8 mounting points, 1×base plate

Cabinet material: High-strength, thickened plywood

Finish: German Liebherr eco-friendly, hardened black water-based paint

Grille: Black steel mesh with waterproof acoustic foam backing

Dimensions (W × D × H): 260 mm × 250 mm × 428 mm

Weight: 12 kg

2

Only

2

Professional Amplifier

LT

LX350

LX350

1. The LX series amplifiers feature a 1.3mm all-aluminum stamped chassis and a monolithic amplifier board design, resulting in a compact overall unit.

2. Utilizes power tubes for current amplification, delivering a clearer and more powerful sound performance.

3. The Class AB design and pure analog circuitry produce a smooth, clear, and pleasant sound, while also supporting lower-impedance speaker loads.

4. Professional audio capacitors are used to filter the rectified power supply, resulting in cleaner ripple, higher output current, and stronger load-handling capability, thereby maximizing the performance of the sound reinforcement system.

5. Step-type potentiometers are used to ensure better channel consistency and prevent contact issues that may arise after prolonged use.

6. A limiter circuit is incorporated to effectively protect the amplifier and speakers in the event of preamp input overload, ensuring worry-free operation.

7. Ultra-low distortion, high signal-to-noise ratio, and wide-bandwidth amplification

8. Comprehensive output protection circuitry featuring overcurrent, center-tap drift, overheat, undervoltage, and soft-start protection

Class AB high-efficiency design, delivering dynamic and powerful bass performance

8Ω*: 350W; 4Ω*: 550W; 8Ω frequency response: 20–20kHz (-0.5dB); Total Harmonic Distortion: <0.05%; Signal-to-Noise Ratio: >104dB; Damping Factor: >600; Channel Separation: >60dB; Slew Rate: >13V/μs; Input Sensitivity: 32dB/1V/1.4V; Input Impedance: 20k/10k; Voltage gain: 32 dB; Product dimensions: 395 x 430 x 88 mm; Power requirements: ~220 V/50 Hz, ±10%; Net weight: 15 kg

1

Unit

3

One-to-two handheld

U-7500

Sodio

Modulation: Wideband FM  

Frequency Range: 600-700 MHz

Number of Channels: 200

Frequency Stability: ±0.005%

Dynamic Range: 100 dB

Maximum Deviation: ±48 kHz, horizontal limit

Audio Frequency Response: 40 Hz–18 kHz (±3 dB)

Signal-to-Noise Ratio: 105 dB

Adjacent Channel Rejection: ≤0.3%

Adjacent Channel Interference Ratio: ≥70 dB

Maximum Operating Range: 300 meters

Applications: Medium to large-scale performances, stadiums, bars, conference halls, and similar venues

Receiver Technical Specifications:

Receiving Mode: Automatic Frequency Tuning

Oscillation Mode: PLL

Antenna input: (50 Ω)

Polarized output: (50 Ω) 0 dBm ±2 dB

Intermediate frequency: 110 MHz

Sensitivity: 12 dBuV  

Spurious Suppression: ≥75 dB

Maximum Output Level: +10 dBV

Power Supply: 12 V DC

Operating Current: ≤ 500 mA

Transmitter Technical Specifications:

Handheld microphone features a built-in helical antenna; belt-pack transmitter uses a 1/4-wavelength whip antenna

Output power: High power 30 mW,　

Low power: 3 mW

Pickup: Dynamic

Spurious suppression: -60 dB

Power supply: Two AA alkaline batteries

Operating time: 6 hours (high power), 10 hours (low power)

1

Set

4

8-channel mixing console

M80TS

APsound (USA)

Technical Specifications

8 mono inputs

Three-band EQ per channel

Built-in 99 DSP digital effects

One auxiliary send and one return

60mm high-precision logarithmic faders

Dual seven-band master EQ

One set of stereo outputs

Individually controllable +48V phantom power per channel

Built-in USB player with recording capability

Channel mute switches and PEL switches

Features 2 groups

Channels: 8 Mono  12 Mono

Channel EQ  3-band  3-band

Aux Outputs  1  1

Return   1  1

Effects   24-bit DSP   24-bit DSP

Main Output    1 Stereo   1 Stereo

Group Outputs    2    2

Phantom Power   48V DC   48V DC

USB/REC player   √   √

Master EQ   7 Band   7 Band

1

units

5

Network Cabinet

Totem

Domestic

800*600*600

1

units

6

mounts

502D

Jiawei

1

Pair

7

Kanon Route

1.5 meters

Akihabara

2

roots

8

Gyukakuto

Akihabara

4

of

9

audio cables

2*1.5

Arctic Hyun

2

Reels