Number

Item Details

Product Description

1

Specifications

External Dimensions (L x W x H): 2620 x 890 x 1820 mm (±10%)

Internal Dimensions (L x W x H): 2000 x 690 x 1520 mm (±10%)

2

Exterior walls

High-quality stainless steel, national standard thickness 1.0mm (±10%)

3

Inner Tank

High-quality stainless steel sheet, national standard thickness 0.8mm (±10%)

4

Door Opening

630*420mm (±10%)

5

Cabinet Door

External dimensions of surface-mounted door (L x W x H): 700 x 490 x 60 mm (±10%)

External surface material: High-quality fingerprint-resistant transfer-printed stainless steel sheet, standard thickness 1.0 mm (±10%)

Internal material: High-quality stainless steel sheet, standard thickness 0.8 mm (±10%)

6

Frame

Load-bearing frame independently manufactured from high-quality stainless steel, specifications 25*25*1.8mm (± 10%) custom tubing.

7

Shelf

External Dimensions (L x W x H): 1960 x 620 x 28 mm (±10%)

Material: High-quality stainless steel tubing, dimensions 25×25×1.8 mm (±10%); four stainless steel round bar handles welded at the corners, φ10 mm (±10%)

High-quality stainless steel sheet, standard thickness 1.0mm (±10%)

8

Support guide wheel

Industrial silent wear-resistant nylon, dimensions φ30×30mm (±10%)

9

Cooling Method

Direct cooling

10

Evaporator

Direct-cooling built-in red copper coil evaporator

11

Condenser

Air-Cooled Fin-Type High-Efficiency Coil Condenser

12

Insulation Layer

Integrally high-pressure heat-cured polyurethane foam, density 50 kg/m^³,

National standard thickness 100 mm (±10%)

13

Rated temperature

-15°C

14

Power Supply

220V/50Hz

15

Input Power

550W

16

Unit Type

2 fully hermetic imported brand compressors

17

Refrigerant

New eco-friendly refrigerant R404a

18

Temperature Control

Microcomputer-controlled fully automatic operation

19

Features

Dual-unit functionality. Upon initial power-up, both units operate simultaneously after a normal delay; after the first operation cycle (startup and shutdown), the units operate alternately; if one unit fails, the other continues normal operation, and the failed unit triggers an automatic alarm; the system automatically switches to preset parameter mode based on ambient temperature changes. The bottom rear of the cabinet features a 25mm (±10%) high-quality stainless steel drain pipe for removing accumulated water from the cabinet.

20

Compressor compartment

Constructed from high-quality stainless steel sheet with folded edges; the compressor and condenser are assembled using quick-install modules (screw installation is not permitted); high-quality stainless steel conforming to national standards with a thickness of 1.0mm (±10%).