No.

Product Item

Product Description

1

Specifications

External Dimensions (L x W x H) mm: 2620 x 1670 x 1820 (±10%)

Internal Dimensions (L x W x H) mm: 2000 x 1470 x 1520 (±10%)

2

Outer Wall

High-quality stainless steel, national standard thickness 1.0 mm (±10%)

3

Inner Tank

High-quality stainless steel, national standard thickness 0.8mm (±10%)

4

Door Opening

630*420mm (±10%)

5

Cabinet Door

External dimensions of surface-mounted door (L x W x D): 700 x 490 x 60 mm (±10%)

External surface material: High-quality fingerprint-resistant stainless steel sheet with transfer printing, GB standard thickness 1.0 mm (±10%)

Internal Material: High-quality stainless steel sheet, standard thickness 0.8mm (±10%)

6

Frame

Load-bearing frame independently manufactured from high-quality stainless steel, using custom-made tubing with dimensions of 25×25×1.8 mm (±10%).

7

Shelf

External Dimensions (L x W x H): 1960 x 620 x 28 mm (±10%)

Material: High-quality stainless steel tubing, 25 x 25 x 1.8 mm (±10%); four stainless steel round bar handles welded at each corner, φ10 mm (±10%)

High-quality stainless steel sheet, standard thickness 1.0mm (±10%)

8

Support Guide Rollers

Industrial silent, wear-resistant nylon guide rollers, specifications φ25×25mm (±10%)

9

Cooling Method

Direct Cooling

10

Evaporator

Direct-cooling built-in red copper coil evaporator

11

Condenser

Air-Cooled Fin-Type High-Efficiency Coil Condenser

12

Insulation Layer

Cyclopentane polyurethane integral high-pressure retort foaming, density 50 kg/m³,

National standard thickness 100 mm (±10%)

13

Rated temperature

-15°C

14

Power Supply

220V/50Hz

15

Input Power

1100W

16

Unit Type

2 fully enclosed imported compressors

17

Refrigerant

New eco-friendly refrigerant R404a

18

Temperature Control

Microcomputer Fully Automatic Control

19

Functions

Single-system operation. Upon initial power-up, both compressors start simultaneously after a standard delay and feature an alarm function; The unit automatically operates in preset parameter mode based on changes in ambient temperature. The bottom rear of the cabinet features a high-quality stainless steel drain pipe (Φ25mm ±10%) for removing accumulated water from the cabinet.

20

Base Frame

Compressor Compartment

High-quality stainless steel rectangular tubing, dimensions 75×45 mm (± 10%), 30×30 mm (±10%); made from high-quality stainless steel sheet with folded edges; compressor and condenser assembled using quick-connect modules (screw installation is not permitted); high-quality stainless steel with a standard thickness of 1.0 mm (±10%).