Equipment for Controlled Cremated Remains Processing

A Horizontal Cremated Ash Grinder is designed for processing cremated remains to a specified fineness. For professional facilities evaluating this type of equipment, key considerations include inlet dimensions, processing capacity, rotation speed, fineness, power requirements, and overall equipment size. These technical details help establish whether a machine's operating range aligns with the requirements of a particular installation.

Our Horizontal Cremains Crusher combines a horizontal equipment configuration with a high-quality stainless steel construction. It is specified with a processing capacity of 15 L/h and above, a rotation speed ranging from 6,000 to 22,000 rpm, and a stated fineness of less than 40 μm. The equipment also has defined electrical requirements and physical dimensions, providing a clear basis for technical review and purchasing discussions.

Key Technical Specifications

The Horizontal Cremains Crusher has the following listed technical parameters:

Inlet dimensions: Less than 15 mm

Processing capacity: 15 L/h and above

Accuracy: 0.04–6 mm

Rotation speed: 6,000–22,000 rpm

Fineness: Less than 40 μm

Power specifications: 380 V, 50–60 Hz, 550 W

Gross weight: 75 kg

Dimensions (W × H × L): 970 × 670 × 840 mm

Material: High-quality stainless steel

These specifications cover the equipment's main processing parameters, electrical configuration, construction material, and physical requirements. Buyers can use them as a reference when reviewing the machine and planning its placement within an existing facility.

Processing Capacity and Inlet Requirements

The specified inlet dimension is less than 15 mm, while the processing capacity is 15 L/h and above. These two parameters describe different aspects of the equipment: the inlet dimension identifies the stated input-size requirement, and the capacity indicates the listed processing throughput.

When evaluating a Horizontal Cremated Ash Grinder, it is important to review both figures against the intended operating requirements. The inlet specification should be considered when assessing material preparation, while the stated capacity provides a reference for comparing equipment options.

Actual operating suitability should be confirmed according to the intended application and the equipment's applicable operating conditions.

Rotation Speed, Accuracy, and Fineness

The machine has a specified rotation speed range of 6,000–22,000 rpm. Its listed accuracy range is 0.04–6 mm, and its stated fineness is less than 40 μm.

These are separate technical specifications and should be understood individually when comparing equipment. Rotation speed describes the operating speed range, while accuracy and fineness are listed as distinct processing parameters. Buyers should confirm the intended meaning and measurement conditions of the accuracy specification with the supplier if these details are critical to their purchasing requirements.

The fineness specification provides a reference for customers assessing the required output characteristics. Confirming the relevant processing requirements before ordering helps ensure that the selected equipment is appropriate for the intended task.

Stainless Steel Construction and Equipment Dimensions

The Horizontal Cremains Crusher is made from high-quality stainless steel. Material selection is an important consideration when assessing equipment construction, cleaning procedures, and compatibility with the operating environment.

The machine measures 970 × 670 × 840 mm, with the dimensions listed in width, height, and length order. Its gross weight is 75 kg. These figures are useful for reviewing the available installation space and preparing handling arrangements before delivery and placement.

Facilities should compare the overall dimensions with their planned equipment location and consider the space needed for access during installation and routine operation. Reviewing these details in advance can help reduce avoidable difficulties during equipment setup.

Electrical Requirements and Installation Planning

The equipment's specified power requirements are 380 V, 50–60 Hz, and 550 W. Before installation, buyers should check that the intended site can accommodate these electrical requirements.

Power compatibility, physical dimensions, and equipment weight are practical points to address during procurement. Confirming them before placing an order allows facility managers and purchasing teams to coordinate their equipment selection with the installation environment.

For projects involving replacement equipment or a new facility layout, reviewing the technical specifications together can help streamline communication between the buyer and supplier.

Choosing a Horizontal Cremains Crusher

Selecting a Horizontal Cremains Crusher involves reviewing the complete specification rather than focusing on a single performance figure. Inlet dimensions and processing capacity relate to material input and throughput, while rotation speed and fineness describe other aspects of the equipment's stated processing characteristics.

Electrical requirements, construction material, weight, and overall dimensions also matter when determining installation suitability. Buyers should identify their operating requirements and confirm any application-specific questions before finalizing their selection.

Our Horizontal Cremains Crusher provides defined technical parameters for this evaluation, including its processing capacity of 15 L/h and above, stainless steel construction, and specified electrical configuration.

Contact Us for Product Information

If you are sourcing a Horizontal Cremated Ash Grinder for a professional facility, we welcome your inquiry. Our Horizontal Cremains Crusher has clearly listed specifications covering processing capacity, rotation speed, fineness, electrical requirements, material, and dimensions.

Contact us to discuss the equipment's technical details and your application requirements. We can help clarify the listed specifications so you can evaluate the product for your intended installation and purchasing needs.